Brother: LC51

1) Cut label at joint between top and bottom halves of
the cartridge case.

2) Flip open the cartridge casing (shell).

3) Put the sharp filling needle onto the syringe and fill the
syringe with ink.

4) Pierce the top part of the cartridge with the needle and S-l-o-w-l-y
inject 15 cc of ink into the cartridge bag.

5) Put a piece of aluminum tape over the filling hole.

6) Place the casing(shell) back together and use a piece of tape to hold the two sides of the casing(shell) together.

Note: Do not bump or press the "pressure release button".

7) Replace the cartridge(s) and run 1 - 3 cleaning cycles
as per printer instructions.